Getting Started; Mixer Module; Audio Inputs - Ibiza COMBO210 Manuel D'utilisation

Features
Handy, versatile and compact, this set is composed of 2x boxes one of which contains a detachable amplified 8-channel
mixer and the other a storage compartment for the supplied leads. Perfect in all situations where portability and ease of
use are of equal importance as sound quality and flexibility.
• High efficiency woofer 10"/25cm
• Titanium compression HF driver 1"/25mm
• Amplified 8-channel mixer
• Built-in Class 'D' amplifier 2 x 150W RMS
• USB-MP3/WMA/SD reader
• Bass/treble/effect & volume controls on every channel
• Master volume
• Effects with repeat and delay function
• Combined XLR/Jack input connectors
• Mic/Line input switch
• Monitor output
• Headphone output with volume control
• 5V USB charging socket
• Supplied incl. 2 x 5m speaker lead with Jack plugs
• Transport handle on every box
Power supply: AC220-240V 50/60Hz
Contents
• 2 Speakers with detachable modules
• 1 module contains the powered mixer
• 1 module is designed for storage of speaker cables
• 1 pair of unshielded speaker cables
• 1 Mains lead
• Manual

GETTING STARTED

1. Remove speakers, power cable and the speaker cables from the carton.
2. Detach the modules from the speakers. By pressing and sliding the button on the top of the speakers, you will release the
module from the speaker. All that is required is a little lift on the module once the button is pressed.
Connect the Mixer Module to the Speakers
On the right side of the mixer you will notice two 6.35mm jacks – these are your speaker output jacks.
Connect the speaker cables from these jacks to the jacks on the rear panel of the speakers.
Connect the AC Power Cable
Connect the socket to the mixer and plug the other end into an appropriate wall socket or extension cord. Turn the
"MASTER VOLUME" control to "0".
Now turn the power switch to the "ON" position. The "POWER" indicator will light up.
Now you are ready to connect an audio source and listen to the sound.

MIXER MODULE

COMBO210

AUDIO INPUTS

The COMBO210 has 8 inputs: 4 mono inputs and 2 stereo inputs.
The COMBO210 also include USB/SD MP3-WMA reader-recorder.
All of the inputs will route to the MASTER VOLUME and to the
MONITOR OUTPUT SECTION
MONO MIC/LINE INPUTS
Moving from left to right there are 4 identical input rows. From
the top to the bottom they contain following items:
Peak LED: PEAK indicator shows you that the input is either
present (green) or is overloaded (red)
3