Usb Operation - Classic Phono TCD-2550 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Making the TCS-2550 ready for transportation.
Lock the [TONEARM] (27) with the [TONEARM CLAMP] (28);
Place the protective cap on the stylus (even when not in use);
Turn the [TRANSPORTATION LOCK SCREW] (26) counterclockwise until you feel
more resistance (don't remove the screw completely!)
CD-MP3 OPERATION
Press the [CD/USB] button (9);
1.
Press [OPEN/CLOSE] (18) to open the [CD DOOR] (12) and place a CD with the
2.
label side facing up in the CD compartment.
Close the [CD DOOR] (12). CD music search is performed and playback will start
3.
automatically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
Stop the playback by pressing [STOP] (14 or 41);
1.
Press [PLAY MODE] (17) or [PROGRAM](32), the display (6) will show "P01" and
2.
flash;
Select desired track by using [SKIP -/+] buttons (15/16 or 39/40);
3.
Press [PLAY MODE] (17) or [PROGRAM](32)gain to Program the track into the
4.
program memory;
Repeat step 3 and 4 to enter additional tracks into the program memory.
5.
When all the desired tracks have been programmed, press [PLAY] (13 or 38) to
6.
play the disc in the order you have programmed.
Note: Press [STOP] (14 or 41) twice to terminate the programmed play.

USB OPERATION

Press the [CD/USB] button (9);
1.
Plug an USB stick into the [USB PORT] (1);
2.
10

Publicité

Table des Matières
loading

Table des Matières