Getting Started - HP MP120 Manuel D'utilisation

All manuals and user guides at all-guides.com

Getting Started

Charging the product
The projector is built with an
embedded battery for mobile use.
Please charge the projector for 5
hours prior to its first use. Repeat
charging will take around 3 hours.
The battery will be charged only when the projector is not in use (Power off).
Connect one end of the supplied power adapter to DC IN jack and the other end to
a power outlet to start charging.
Charging LED Indicator
During charge, the LED indicator lights will flash intermittently. When the battery
is fully charged, the LED indicator lights appears solid blue.
LED indicators
LED Status
3 blue LEDs stay on
2 blue LEDs stay on
1 blue LED stays on
1 blue LED blinks
LED Marquee
Power On / Off / Standby
• Push the Power button for 2 seconds to turn on the projector.
• Push the Power button again for 3 seconds to turn off the projector.
• Standby mode: Push the Power button for 1 second to turn on / off the projector
light to save the battery and system reboot time. (The LEDs are still on when the
projector is in standby mode.)
User Manual
Indication
Power capacity is between 60% to 100%
Power capacity is between 35% to 60%
Power capacity is between 10% to 35%
Power capacity is below 10%, LED will
blink for 10 secs then turn off.
Projector is being charged
2