Trevi ME 3P20 RC Mode D'emploi page 5

ME 3P20 RC
TIME DISPLAY BY RADIO CONTROL
This device is equipped with a receiver capable of receiving the time signal of the Physikalisch Technische Bundesanstalt
Braunschweig (central Germany) receivable within a radius of 1500Km.
1. Press and hold the DOWN / RCC button (B5) of the weather station, the symbol (A1) of the radio control will flash and
within 24 hours the time signal of the radio control will be displayed.
This weather station is also equipped with DST function, automatic correction of daylight saving time via radio control.
Note1: when the flashing radio control symbol appears on the display, no manual adjustment is possible.
Note2: when the symbol remains on, it means that the signal has been correctly received.
Note3: the time is transmitted from central Germany, so if we are in a country with a different time than Germany it is
necessary to set the time zone manually.
Note4: position the weather station away from devices that generate magnetic fields such as mobile phones, televisions, etc.
Not all areas of Europe may be able to receive the radio control signal. In this case it is necessary to set the time manually.
CLOCK MANUAL ADJUSTMENT
1. Press and hold the SET button (B1) to enter manual clock adjustment.
2. Set the UTC correction of the time zone of your region using the UP (B2) or DOWN (B5) keys. It is possible to select
between -1, 0, +1 (this setting is used to correctly receive the time from radio control, for Italy select 0).
3. Press the SET button (B1), the display will start to flash in 12/24 hours on the display.
4. Set the time display in 12/24 hours using the UP (B2) or DOWN (B5) keys.
5. Press the SET button (B1), the hours will start to flash on the display.
6. Set the hours using the UP (B2) or DOWN (B5) keys.
7. Press the SET button (B1), the minutes will start to flash on the display.
8. Set the minutes using the UP (B2) or DOWN (B5) keys.
9. Press the SET button (B1), the year will begin to flash on the display.
10. Set the year using the UP (B2) or DOWN (B5) keys.
11. Press the SET button (B1), the month will begin to flash on the display.
12. Set the month using the UP (B2) or DOWN (B5) keys.
13. Press the SET button (B1), the day will begin to flash on the display.
14. Set the day using the UP (B2) or DOWN (B5) keys.
15. Press the SET key (B1), the language in which you want to display the current day will start to flash on the display.
16. Set the language using the UP (B2) or DOWN (B5) keys.
17. Press the SET button (B1) to end manual clock adjustment.
ALARM ADJUSTMENT
1. Press the SET button (B1) once to display the Alarm (A15). Press it again to return to displaying the current time.
2. While the alarm is displayed, keep the SET key (B1) pressed, the alarm time on the display starts to flash.
3. Press the UP (B2) or DOWN (B5) keys to adjust the time.
4. Press the SET button (B1), the minutes of the alarm will start to flash on the display.
5. Press the UP (B2) or DOWN (B5) keys to set the minutes.
6. Press the SET button (B1) to end the alarm adjustment.
7. To activate the alarm, press the SET button (B1); while the alarm is displayed, press the UP (B2) or DOWN (B5) keys. A
bell icon (A14) will appear to indicate that the alarm is active.
8. To turn off the alarm ringtone, press any key. If not deactivated, the ringer automatically turns off after 2 minutes.
5
English