Reebok TITANIUM TT 1.0 Mode D'emploi page 5

TITANIUM TT1.O/TT2.0/TT3.0 USER MANUAL
ASSEMBLY GUIDE
01
Find the running deck locking pin that built with
red color knob where underneath right side of
running deck frame.
02
Pull the locking pin anticlockwise to
fully remove the pin.
8
ATTENTION
After you fully assemble the treadmill,
before operation, please ensure that the
running deck locking pin is fully removed.
Follow below procedures to remove the
running deck locking pin.
03
After the locking pin been removed, you can
start to use treadmill now. Enjoy your workout.

9
reebokfitnessequipment.com