Klindex Hercules 800 Propano Manuel page 18

Table des Matières

Publicité

Local Agencies and Regulations
NFPA
Operating a propane powered floor care machine requires compliance with
certain safety regulations. The National Fire Protection Agency (NFPA)
Standard for Storage and Handling of LP Gas is the appropriate authority for
safe propane use. A copy of this publication is available through the NPFA in
Quincy, MA (1- 800-334-3555).
Among its regulations, NFPA #58 requires that all personnel employed in the
handling of propane gas be trained in its proper handling and operating
procedures. It also requires them to carry a written certification from their
employer or training supervisor to attest to such training. Although this is
directed mainly to those who fill and transport liquid propane gas, Onyx
Environmental Solutions recommends that operators of propane powered
floor care machines in public places be trained and certified as well.
CARB / EPA
The California Air Resource Board (CARB) and Environmental Protection
Agency (EPA) also set limits for propane powered engines used outdoors, but
CARB/EPA approval does not signify that the engine is safe to use indoors.
CGA
The Canadian Gas Association (CGA) has set a limit of 1500 ppm CO in
exhaust flow.
OSHA
For propane powered machines used indoors, the Occupational Health and
Safety Administration (OSHA) has established a limit of 50 ppm CO for 8-hour
time weighted average (TWA) in ambient air and is considering a limit of 800
ppm CO in exhaust flow.
DOT
The Department of Transportation (DOT) has established regulations
regarding the safety of fuel cylinders including the ones used on propane
powered floor care machines.
Local Agencies
Local law enforcement agencies such as the local Fire Marshall also rely on
independent testing labs such as UL and CGA before giving their approval of
the use of some equipment. These labs thoroughly test equipment and submit
their stamp of approval only after rigorous testing. While not being required by
all law enforcement agencies, the stamp of approval by these agencies
further assures the operator that he or she is working with and around safe
equipment.
Data ultimo aggiornamento: 24/07/2018
Pag. 18 di 64

Publicité

Table des Matières
loading

Table des Matières