AKASO Brave 4 Manuel De L'utilisateur page 21
Masquer les pouces
Voir aussi pour Brave 4:
- Manuel de l'utilisateur (16 pages) ,
- Mode d'emploi (30 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
To stop recording:
Press the Grey Video Button again. The camera will emit one beep, the camera light
will stop flashing and the camera will stop recording.
PHOTO
To capture a photo, put the camera is in Photo Mode.
To take a photo:
Press the Red Photo Button. The camera will emit a camera shutter sound.
CR2032 BATTERY REPLACEMENT FOR BRAVE 4 REMOTE
1. Use a 1.8mm Phillips tip screwdriver to remove the 4 screws on the back cover of
the remote, allowing you to open it.
2. Remove the other four screws in the PCB board.
19
Publicité
Table des Matières
