English; User Instructions - Senz Sports M500 Manuel D'instructions

English

User instructions

START
STOP
TIME / SPEED
UP / DOWN
DISPLAY DISPLAY
00:00 – 99:59
TIME
00.00 – 99.99
DISTANCE
0 – 9999
CALORIES
0 – 999
STEPS
0 – 6 km/h
SPEED
General usage:
1. Insert the plug into the socket (usually found at the motor of the device), the display
will now be activated.
2. MANUAL will have four programs. In STOP state, press 'TIME' and choose one of the
trainingmodes:
Mode 1: Normal counting. Time, Distance and Calorie will increase.
-
Mode 2: Time countdown. Under selecting, time window flashes, press '+' or
-
'-' to select.
Mode 3: Calories countdown. Under selecting, calories window flashes, press
-
'+' or '-' to select.
Mode 4: Distance countdown. Under selecting, calories window flashes, press
-
'+' or '-' to select.
3. After trainingsmode is set, press START and the device will count down from 5
seconds and will start the training.
Other information:
The treadmill requires an earthed socket.
-
If the treadmill is not used for a while, the sleep mode will be activated. The data is retained
-
and is shown again when the training is restarted.
Manual – Treadmill – Senz Sports – M500 – SZLB002
Start or pause the current training.
Stop the training or return to the previous screen.
Switch between data or choose trainingsmode.
Filling in data or changing the speed.
SETTINGS
00:05 – 99:00
01.00 – 99.00
20 – 9999
-
-
FUNCTION
Current training time
Current distance
Current burned calories
Current steps
Current speed
8