Notice from the original manual
Markings in this document:
Danger! This sign warns against the danger of personal injuries.
Caution!
This sign warns against the danger of property damage and damage to the environment.
Call for action
1. Safety Instructions
1.1. Proper usage
VULCA PRO BASIC VIRAX are only to be used for producing welded joints on PE - PP and PVDF
tubes according to the technical data.
1.2. General safety rules
ATTENTION! When using electric tools, the following fundamental safety measures must be taken
to prevent electric shock, injury or fire.
Read all of these instructions before you use the electric tool, and store the safety
instructions properly.
Read carefully the instructions
Safety glasses are mandatory
Hearing protections are mandatory
Service and maintenance:
1
Regular cleaning, maintenance and lubrication. Always pull the electrical plug before any
adjustment, maintenance or repair.
2
Have your device repaired only by qualified experts and only with original
replacement parts. This ensures the continued safety of the device.
Working safely:
1
Keep your work area orderly. A messy work area can cause accidents.
2
Consider environmental influences. Do not expose electric tools to rain. Do not use
electric tools in damp or wet environments. Keep the work area well lit. Do not use electric tools
where there is a risk of fire or explosion.
3
Protect yourself from electric shock. Avoid physical contact with earthed parts (such as
Gloves are mandatory
Safety shoes are mandatory
20