→ Contacteur statique largeur 22,5mm prêt à l'emploi.
Relais synchrone spécialement adapté à la plupart des charges.
22,5mm Solid State Contactor for space-saving design.
Ready to use with its heatsink
Zero Cross Solid State Relay especially designed for most types of loads.
→ Sortie 12 à 275VAC 25A.
Limitation du courant (20A AC-51) par le dissipateur: voir courbe thermique.
Haute Immunité et Protection de la tension de sortie par varistor.
Très faible niveau de synchronisme.
Output 12 to 275VAC 25A.
Current limitation (20A AC-51) by heatsink : see derating curve
High Immunity and output voltage protection by VDR.
Very low zero cross level
→ Large plage de contrôle: 3,5 - 32VDC avec un courant de commande régulé.
Connecteur de commande débrochable en 2 points
LED de visualisation sur l'entrée de couleur jaune.
Protection aux surtensions sur l'entrée intégrée.
Large control range: 3.5-32VDC with input current limiter.
2 points pluggable control connector. Yellow LED visualization on the input.
Input over-voltage protection.
→ Protection IP20 par volets amovibles sur les bornes.
Etiquette repère disponible en option.
IP20 protection by removable flaps on terminals with optional labels
→ Construit en conformité aux normes IEC/EN60947-4-3
et EN60950/VDE0805 ; IEC 60335-1/ VDE0700-1 ; UL-cUL
Designed in conformity with IEC/ EN60947-4-3
and EN60950/VDE0805 ; IEC 60335-1/ VDE0700-1 ; UL-cUL
Dimensions :
CAD documents:
www.celduc-relais.com/uk/plan3d.asp
2
(*) TMS
=Thermo Mechanical Stress Solution
P P P P r r r r o o o o u u u u d d d d t t t t o o o o s s s s e e e e r r r r v v v v e e e e y y y y o o o o u u u u
All technical caracteristics are subject to change without previous notice.
Caractéristiques sujettes à modifications sans préavis.
celpac
Contacteur statique monophasé
de puissance
Single phase Power Solid contactor
3/A1+ 4/A2-
®
2G
Install it & Forget it!
FILE Nr. E69913
1/L1 et 2/T2 peuvent être inversés
1/L1 and 2/T1 can be swapped
LED
Le relais doit être monté sur dissipateur thermique.
SSR must be mounted on heatsink
Application typique: Résistance 8 kW (Catégorie AC-51) en 400VAC
Typical application: 8 kW resistor (AC-51 load) on 400 VAC
celduc
r
e
S/MON/SUL842070/E/15/01/2014
page 1 / 5F/GB
SUL842070
Output: 12-275VAC 25A (*)
Input : 3 -32VDC
(*) 20A@ 40°C AC-51
UL 18A
see derating curve
Livré avec conecteur de
commande et volets /
delivered with control
connector and flaps
Avec étiquette de repèrage
With optional labels
Secteur AC /
AC Mains
Charge /
l
a
i
s
Load
®