Wellclima Genius Remote Mode D'emploi page 7

The remote control can be set to 3 different modes. Choose mode 1 if the brand of your
air conditioner is among those in the image below, or modes 2 or 3 for all other brands.
1. Connected to www.wellclima.com website, find air conditioner brand in the 'CODE LIST' of SMART
model and check the first set of codes.
2. Press and hold SET button, then press POWER button and hold them down. Release the two buttons
when the model code flashes on the screen window (bottom right). Press 'TEMP▲' or 'TEMP▼' until the
code found in Step 1 appears on the screen window (you can keep the TEMP keys pressed to scroll the
codes faster).
AUTOMATIC CODE SEARCH
1. Aim the remote towards the air conditioner receiver window.
2. Press and hold SET button, about 6 seconds later the model code (bottom right) starts to flash, do not
release the button until the air conditioner switches on automatically.
SETTING REMOTE CONTROL
3. Press the SET button to exit, check the button functions. If the device respond correctly the setting
is finished, if not, please repeat steps 2 and 3 with next set of codes.
LOOK OUT: when the codes are separated by a - sign it means all the numbers between the first and the
last (es LG 600-609 you have to test codes 600, 601, 602.....>609). If none of the codes work with your air
conditoner or if your brand is not in the list don't worry, proceed with the Automatic Code Search.
3. Release the SET button immediately when the conditioner turns on and check the button functions.
If the buttons work correctly, the code setting is effective. If not, please repeat steps 2 and 3.
4. A complete scan of all codes takes about 30 minutes. Do not stop the search before, or before the air
conditioner switches on.
2
▲