Publicité
Les langues disponibles
Les langues disponibles
For s af et y r ea son s a nd t o g et t he m ost f r om you r s ing le d is c ma ch ine , m ak e su r e
you r e ad an d st ud y t his m an ua l t ho roug hl y b ef o r e us e.
T h e SINGLE BRUSH s e r i e s i s d e s i g n e d f o r s c r u b b i n g , s t r i p p i n g , s p r a y c l e a n i n g a n d
b o n n e t c l e a n i n g v a r i o u s t y p e s o f s u r f a c e i n c l u d i n g n a t u r a l s t o n e , c e r a m i c t i l e s ,
m a r b l e , g r a n i t e a n d s p e c i a l f l o o r c o v e r i n g s i n c l u d i n g c a r p e t .
S a f e t y :
1. Do not operate the machine:
a)
Unless trained and authorised.
b)
Unless the plug and mains power supply are earthed.
c)
If the power cable and plug are damaged. In this case, you should under no
circumstances use the machine. Contact a service centre to have the cable
and/or plug replaced.
d)
In pools or puddles of water as this could result in electric shock.
e)
If the operator has reduced physical, sensor y or mental capabilities.
f)
If the operator is under age.
g)
If the brush is not attached to the machine
2. Before starting the machine:
a)
Mak e sure all safety devices are in place and functioning correctly.
b)
Position "wet floor" signs as required.
3. W hen using the machine
a)
Do not run the machine over the power cable.
b)
Do not operate the ON/OFF levers when the handle is in the upright position.
c)
Do not touch the power plug with wet hands.
d)
Do not allow children to play with or near the machine.
4. Before leaving or servicing the m achine:
a)
Turn the machine off.
b)
Unplug from the mains socket.
5. W hen servicing the machine:
a)
Unplug from the mains socket.
b)
Use manufacturer supplied or approved replacem ent parts only.
c)
All repairs must be perform ed by qualified service personnel.
Assembly:
1. Attaching handle to base
a)
Unscrew the black bolt from the machine base. Position the handle in the
corresponding screw and tighten the black bolt on the screw.
b)
Press the handle height adjustment lever and place the handle in a vertical
position
c)
Plug the power cable into the switch-housing socket.
2. Mounting optional detergent tank
a)
Attach the top detergent tank bracket to the handle shaft.
b)
Insert the tab at the bottom of the tank into the slot located near the base of the
handle.
c)
Connect the chain to the detergent control lever.
1
Secure the top of the tank with the top bracket.
ENGLISH (Translation of original instructions
Connect the detergent tube to
)
Publicité
