Publicité
Liens rapides
IMPORTANT: this installation manual has been intend to be consulted together the datasheet which has to be regarded as a
complementary part of it. Datasheet are accessible through the ENEDO website link herein below provided:
https://enedopower.com/led-drivers/programmable-led-drivers/dld1000-2-channel-constant-current-led-drivers/
https://enedopower.com/led-drivers/programmable-led-drivers/dld1500-3-channel-constant-current-led-drivers/
P
S
RODUCT
PECIFICATION
Model Grade, Output Power
2 Channels: DLD1000-
3 Channels: DLD1500-
(*) are available also the versions DLD1500-L070-DA, DLD1500-L070-DX, DLD1000-H070-DA, DLD1000-H070-DX, DLD1500-H070-DA and DLD1500-H070-DX, with all same characteristics. The
only difference is the pre-set output current: 0.7 A instead 1.2 A.
Power
Model
(**)
[W]
DLD1500-L120-DA
1500
DLD1500-L120-DX
1500
DLD1000-H120-DA
1042
DLD1000-H120-DX
1042
DLD1500-H120-DA
1563
DLD1500-H120-DX
1563
(**) the DLD1000 are available only with High Input Voltage.
(***) frequency 50-60 Hz
Torque
Connection
[Nm]
Mains Cable M25
7.5
DALI or DMX Cable
2.5
M16
Output Cable
8
M32
(****) up to 2.5 mm
2
for stranded conductor, up to 4 mm
www.enedopower.com
Input Voltages
Low Input: L
High Input: H
Output
Input Voltage
(***)
Channels
[V
]
AC
3
120/220 – 240/277
3
120/220 – 240/277
2
220 – 400
2
220 – 400
3
220 – 400
3
220 – 400
Cable Ø Min-Max
[mm]
10 – 17
5 – 10
13 – 21
2
for rigid conductor
Default Output Current
1200 mA: 120-
*
(available also 700 mA: 070-)
Input
Output
Current
Voltage [V
]
DC
[A]
6 ÷ 15
260 ÷ 520
6 ÷ 15
260 ÷ 520
2.8 ÷ 5.5
260 ÷ 520
2.8 ÷ 5.5
260 ÷ 520
4 ÷ 8
260 ÷ 520
4 ÷ 8
260 ÷ 520
Connector
Connector
Section
(****)
AWG
[mm
2
]
15-12
1.5 – 2.5
18-12
0.8 – 2.5
15-12
1.5 – 2.5
I
NSTALLATION
DLD1000/1500 DA/DX S
IP66
Communication type
DALI-2: DA
DMX-RDM: DX
Pre-setted
Output
Output
Current [A]
Current [A]
0.35 ÷ 1.2
1.2
0.35 ÷ 1.2
1.2
0.7 ÷ 1.4
1.2
0.7 ÷ 1.4
1.2
0.7 ÷ 1.4
1.2
0.7 ÷ 1.4
1.2
Front View
IM_DLD1500 DA Series_Rev00, Nov 2020
M
ANUAL
ERIES
Communication
type
DALI-2
DMX - RDM
DALI-2
DMX - RDM
DALI-2
DMX - RDM
Publicité
Sommaire des Matières pour Enedo DLD1000DA Serie
- Page 1 ERIES IP66 IMPORTANT: this installation manual has been intend to be consulted together the datasheet which has to be regarded as a complementary part of it. Datasheet are accessible through the ENEDO website link herein below provided: https://enedopower.com/led-drivers/programmable-led-drivers/dld1000-2-channel-constant-current-led-drivers/ https://enedopower.com/led-drivers/programmable-led-drivers/dld1500-3-channel-constant-current-led-drivers/ RODUCT...
- Page 2 Entretien: Ces produits ne sont pas réparables par le client. Servicing: These products are not customer serviceable. cliente. Riparazioni consentite solo ed esclusivamente al personale ENEDO et leurs agents agréés sont uniquement autorisés à ENEDO and their authorized agents only are authorised to specializzato ed autorizzato da ENEDO.
- Page 3 Manutenção: Estes produtos não são reparáveis pelo cliente. Servicio: estos productos no se pueden reparar ni cambiar de werden. Reparaturen dürfen nur von ENEDO und ihren Apenas a ENEDO e seus agentes autorizados poderão realizar cliente. Reparaciones permitidas única y exclusivamente al autorisierten Vertretern durchgeführt werden.
- Page 4 NSTALLATION NSTRUCTIONS Orientation and Tc Dimensions ORIZONTAL ERTICAL The distances between the LED drivers (each other or to the side wall) depends from several factors: - indoor (box/cabinet/area dimensions) or outdoor use - type and amount of ventilation (T - number of LED drivers and chosen installing orientation The distances must be calculated to stay within the maximum T allowed for the Fixing Point (4x)