Rf-t ONE Mode D'emploi page 14

ONE
d
ismantlinG the PreviOus mechanism
Type BFL(T) and BFN(T) on
CR2/CU2/CA2/CU4/CU2-15:
1. Unlock the motor by
interrupting the power
supply.
2. Loosen the fixing screws
of the motor and remove
the old motor.
3. For types BFLT/BFNT:
Unscrew the thermo-
electric fuse and remove
it.
Type BFL(T)/BLF(T) on
CR60/CR120/CU-LT(1s):
1. Unlock the motor by
interrupting the power
supply.
2. Loosen the fixing screws
of the motor and remove
the old motor.
3. For types BFLT/BLFT: un-
screw the thermo-electric
fuse and remove it.
4. Remove the old
membrane.
14
Actuator
4. Loosen the three screws
and remove the base
plate.
Set aside the operating
arm, screw and washer
to use on the new base
plate.
Type MFUS(P) on
CR60/CR120/CU-LT(1s):
1. Unlock the existing
mechanism by pressing
the unlocking button.
2. Loosen up the two fixing
screws and dismantle
the mechanism.
Type B(L)F(T) on
CR2/CU2/CA2/CU4/CU2-15:
1. Unlock the motor by
interrupting the power
supply.
2. Loosen the fixing screws
of the motor and remove
the old motor.
3. For type B(L)FT: Unscrew
the thermo-electric fuse
and remove it.
3. Replace the old
membrane by the new
(unperforated) one.
K132-E
04/2021
4. Loosen the three screws
and remove the base
plate.
Set aside the operating
arm, screw and washer
to use on the new base
plate.
Type CFTH on
CR2/CU2/CA2/CU4/CU2-15:
1. Unlock the existing
mechanism.
2. Loosen up the
three fixing screws
and dismantle the
mechanism.