Quax CAMILLE 76 10 04 0 Serie Manuel page 24

CAMILLE
Quax Quax
First dreams
® ®
First steps
24
Kleerkast met twee draaideuren
76 10 04 0xx
Schrankwand mit zwei Drehtüren
Step 4 : Use the parts of step 3, a shelf H, two wooden
dowels b, two connectors j, two eccentrics k, one coat
hanger support K and two wood screws o
Push the wooden dowels (b) in the provided openings of
the partition side (E). Fix the connectors (j) in the drillings
next to the wooden dowels. Insert the eccentrics (k) in
the provided openings at the back side of the shelf (H).
Push the shelf over the dowels and the connectors. Now
tighten all eccentrics. Fix the support (K) with the wood
screws (o).
Step 6 : Use the parts of step 5, the top A, six wooden dowels b,
six woodscrews c and four wood screws d
Push the wooden dowels (b) in the provided openings of the sides
and the partition panel. Push the top on the dowels and insert the
wood screws in the provided openings of the top, the wood screws
(c) at the upper side of the top, the wood screws (d) on the back-
side. Tighten them all.
Armoire avec deux portes
Wardrobe with two doors
Step 5 : Use the parts of step 4, the right
side C, the upper profi le J, the bottom profi le
I, eight wooden dowels b, four connectors j,
four eccentrics k, one coat hanger support K
and two wood screws o
Push the wooden dowels (b) in the provided
openings of the right side (C). Fix two con-
nectors (j) in the drillings next to the wooden
dowels. Insert two eccentrics (k) in the provid-
ed openings at the back side of the shelf (H).
Push four wooden dowels (b) in the provided
openings at the top and two at the bottom of
the sides (B and C). Fix two connectors (j) in
the drillings next to the wooden dowels at the
level of the bottom profi le (I). Insert two ec-
centrics (k) in the provided openings on the
backside the bottom profi le (I). Push the pro-
fi les (I and J) over the dowels and the con-
nectors of the left side (B). Tighten all eccen-
trics. Push the right side (C) over the dowels
and the connectors and tighten all eccentrics.
Fix the holder for the a coat hanger (K) with
two wood screws (o).