Important Notice - Pentair Magicstream Deckjet II Guide De L'installation

Masquer les pouces

Table des Matières

Les langues disponibles

MagicStream

This Product should be installed and serviced by a professional pool/spa technician. The procedures

in this manual must be followed exactly. Improper installation and/or operation will void the warranty.

Before installing this product, read and follow all warning notices and instructions accompanying this

product. If you have application questions or would like additional copies of these instructions, please

visit www.pentairpooleurope.com.

Attention Installer.

This manual contains important information about the installation, operation and safe use of

this product. This information should be given to the owner/operator of this equipment.

Overview

The MagicStream® Deck Jet II is designed to be installed in the deck or landscaping surrounding the pool,

spa, fountain, or pond. The Deck Jet's swivel nozzle (Figure 1) produces a 5/16" stream of water. The

Deck Jet body is equipped with two, 3/16" drain holes to allow water to drain from the cup surrounding

the nozzle into the drain cavity at the base of the body (Figure 1). Be sure to keep the drain holes clear

of debris. To aid in draining, Pentair recommends placing a gravel layer beneath the Deck Jet.

Gravel layer

Pentair recommends that each Deck Jet be fitted with a 3/4" ball valve to allow flow control for each

nozzle. For installations invloving multiple nozzles, we recommend installing a 3-way valve on the

main line near the pump for overal adjustment.

The Deck Jey II is designed for a maximum flow rate of 1,15m³/h at 3.5m of head. (see table below).

Deck Jet II (580003-EU)

CAUTION