Setting Of The Time And The Week Day - Bticino L4448 Notice De Montage

Setting of the time and the week
DAY 1
day
This setting applies for all programs.
P1
Press P to enter the programming.
P + - M S
Press the key + to advance or the key - to
go back, until the requested time appears
(for instance 14 o'clock) store with the key
M.
Follow the same procedure to set the
DAY 1
minutes (for instance 31"). Store with the
key M.
P1
P + - M S
106
All manuals and user guides at all-guides.com
Follow the same procedure to set the day
DAY 1
of the week (DAY1= Monday, DAY 2 =
Tuesday etc).
Store with the key M.
P1
Now the time is set on the actual hour,
P + - M S
minutes and days of the week referring to
the programming.
Attention:
differ according to the program selected
(MAN, P1, P2, P3).
If the selected program is MAN, at the end
of the time and day setting the thermostat
assumes the normal working conditions.
If the selected program is P1, P2 or P3,
press the key P to quit the setting.
For the subsequent program steps follow
the inherent instructions hereafter specified.
the following programming steps
107