Turning The Tv On And Off; Memorizing The Channels - Samsung PN50A760T1F Guide De Configuration Rapide

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢
It may take a little while before you see a full picture.
Viewing the Menus
1
With the power on, press the MENU button.
The main menu appears on the screen. The menu's
left side has icons:
Picture, Sound, Channel, Setup, Input,
Application.
2
P ress the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon's
sub-menu.
➢
To move to a lower menu, turn the wheel
clockwise when the menu Display is on the
screen. To move to a higher menu, turn the
wheel counterclockwise.
3
Press the EXIT button to exit.
➢
It takes about one minute until the on-screen
menu disappears.
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Detailed Settings

Memorizing the Channels

Your TV can memorize and store all of the available
channels for both air and cable channels. After the
RETURN
available channels are memorized, use the CH
button to scan through the channels. This eliminates
EXIT
the need to change channels by entering the channel
digits. There are three steps for memorizing channels:
INFO
selecting a broadcast source, memorizing the channels
TOOLS
(automatic) and adding and deleting channels (Channel
Lists).
: Standard
: 7
: 95
: 45
: 50
: 50
: G50/R50
RETURN
or CH
EXIT
W.LINK
CH LIST
INFO
TOOLS
English - 8
Selecting the Video Signal-source
Before your television can begin memorizing the
available channels, you must specify the type of signal
source that is connected to the TV (i.e. an Air or a
Cable system).
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
Antenna
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
2
Press the ENTER button to select Antenna.
Press the ▲ or ▼ button to select Air or Cable,
then press the ENTER button. Press the EXIT
button to exit.
Antenna
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Storing Channels in Memory
(Automatic Method)
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
Antenna
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
2
Press the ▲ or ▼ button to select Auto Program,
then press the ENTER button.
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
Move
: Air ►
: Air
Air
Cable
: Air
►
Start
Start
Start
Enter Return