Step 2: Assemble The Antenna - weBoost DRIVE X OTR FLEET Guide D'installation

______
Step 2: Assemble The
Antenna
cable
from antenna
Mast
Extension
OTR
Antenna
Mast
Extension
Mast
Extension
OR
Antenna
Side Exit
Adapter
cable
DRIVE X OTR FLEET CELL SIGNAL BOOSTER
Once you have determined the
best location for the antenna
and have determined if Mast
Extensions are needed, insert
cable through mast.
NOTE: Mast Extensions may not be
needed depending on your mounting
point.
If using Mast Extension(s) add
thread locker (provided) to thread
point(s). Screw into place.
NOTE: Be sure the antenna is the correct
height before applying thread locker.
Add thread locker (provided) to
thread point and screw on the
Side Exit Adapter.
NOTE: When adding the side exit adapter
hold the antenna vertically and screw the
adapter from the bottom up. This reduces
cable twisting.
3