grandsteram GVC3220 Guide D'installation Rapide page 4

OVERVIEW
The GVC3220 is a revolutionary video conferencing system that provides an in-
teractive and immersive video conferencing environment to increase collabora-
tion and productivity. This SIP-based GVC3220 allows the user to connect their
video conferencing solutions with any 3rd-party SIP or H.323 video conferencing
platform. Additionally, since the GVC3220 is based on an Android 9.0 operating
system. Users will elevate their experience with its 4K Ultra-HD video, up to 5-way
1080P video conferences, screen-sharing capabilities, Integrated Wi-Fi, Bluetooth
5.0 + EDR and more.
INSTALLATION
The GVC3220 can be installed in the following two ways:
Option 1: Place on desktop.
Option 2: Mount on wall. Wall mount bracket is required.
INSTALLING BRACKET TO MOUNT THE GVC3220 ON
WALL
1. Place the wall mount bracket against the wall and move it to the position
where it's needed.
2. According to the position of the four screw holes on wall mount brack-
et, locate the corresponding spots on the wall and drill the holes.
Note: Dimension of bracket screw hole is 82mm(L)×60mm(W).
3. Fit the four anchors into each hole on the wall. Please make sure the glossy
side is placed outwards.
4. Mount the wall mount bracket to the wall. Then insert 4 PA4*30 screws into
each anchor to secure the bracket.
5. Tighten the screws so that bracket can be securely placed against the wall.
6. Post alignment of the bracket; need to align with the positioning hole on the
bottom of the bracket.
7. Place GVC3220 on the top of wall mount bracket. Note that the positioning
post on the bracket must be aligned with the hole at the bottom of GVC3220.
The lens is facing outside the wall and GVC3220 needs to be placed stably.
8. Use one hand screw to fix GVC3220 on the bracket from the bottom, and then
use the remaining three PM3*8 screws to secure the GVC3220 to the bracket.
9. See figure below which GVC3220 is fixed on the bracket after tightening the
screws.
~ 3 ~
CONNECTING THE GVC3220
1. Connect the LAN port of the GVC3220 to the RJ-45 socket of a hub/switch or
a router (LAN side of the router) using the Ethernet cable.
2. Connect the primary HDMI output port (marked with a blue highlight) of
the GVC3220 to the HDMI port of the main display device (e.g., TV). Con-
nect the secondary HDMI output port if you have additional display devices.
Note: Please make sure to follow the port order when connecting HDMI output
ports. When there is only 1 HDMI output, it has to use the primary HDMI port.
GVC3220 will not work correctly if connecting the secondary HDMI output port
without making sure primary HDMI output port is connected.
3. Connect the 48V DC output plug to the power jack on the GVC3220; plug the
power adapter into an electrical outlet.
HDMI IN
Line IN
HDMI OUT
Line OUT USB 3.0
4. The display device (e.g., TV) will show the idle HOME screen with IP address
on the top status bar.
Lens
LED Indicator
5. Insert your SD card into the SD card slot. The recording files will be saved in
SD card.
6. (Optional) Connect presentation device (e.g., a laptop) to the GVC3220 HDMI
IN port for presentation purpose during conference call.
7. (Optional) Connect USB accessory (e.g., mouse, keyboard, USB flash drive
and etc) to the USB port.
Media Port
RESET
DC-IN 48V
SD Card
LAN Port
USB 2.0
Infrared Receiver
Ultrasound Paired
Speaker
~ 4 ~