Table des Matières
Publicité
CONNECTION
Front panel
1.
Power On/Off, Disco LED: Press this button to turn On XD101
At On state, tap this button to turn on/off disco lighting.
Press and hold this button to turn Off XD101
2.
Voice Changer: Press this button to switch between different voice effect on microphone
(Hi Pitch > Low Pitch > Robot 1 > Robot 2, Hold to turn off voice changer)
3.
Scratch A/B/C/D: Press this button to switch between 4 sound banks on jog wheels.
4.
Mic Echo: Press this button to select echo level on microphone
(No Echo > Echo lv1 > Echo lv2 > Echo lv3 > Echo lv4 )
5.
Master volume: turn this knob to increase / decrease master speaker output volume
6.
Jog Wheels: The Left & Right DJ jog wheels, turn this jog wheel to trigger differen built in sound to mix with your music.
You may select different jog wheel sounds with the Scratch A/B/C/D button.
7.
Jingle: press this button to trigger the built-in jingle sounds.
#1-4: Drum #5-8: Voices (each button contains 2 sounds)
8.
Intelligent Crossfader: after connecting your tablet to XD101, and run the "MixVibes" DJ application. You could use this
crossfader to mix the music between Deck A and Deck B by sliding the fader.
(Note: Headphone signal is reverse to the crossfader position. e.g When fader is on Deck A, Deck B will be played on headphone.)
9.
Master output speaker
10.
Disco LED: Press the "Disco LED" button to turn On/Off the Disco LED lighting
Back panel
11.
Tablet input: Connect your iPad / iPhone or Android tablet to this port with the included RCA to mini jack adapter cable
for DJ application
12.
DC Power input: Connect the included DC 6V800mA power adapter to this socket when XD101 is NOT operated with AA
batteries.
13.
Aux-Out: mini-jack output for connecting to external speaker system with bigger sound.
14.
Mic-In: Connect the include XD101 microphone to this port,
(Note: There is 2 buttons on XD101 microphone, and you may press the button to trigger the built-in jingle / voice while you sing)
15.
Headphone Output: Connect mini jack earbud / headphone to this port to monitor cue signal for DJ application
(Note: Headphone signal is reverse to the crossfader position. e.g When fader is on Deck A, Deck B will be played on headphone.)
Powering the XD101
A. By Batteries
Flip the XD101 and unscrew the battery compartment, insert 4x AA batteries in order to power up the XD101
B. By AC adapter
Plug the included DC6V 800mA to main power and connect the plug to XD101 when there is NO batteries inside XD101.
Mix Like a Professional DJ!
The XD101 is designed for beginner DJ and you could mix like a Pro DJ with XD101 and a tablet.
XD101 works with MixVibes (http://www.mixvibes.com/) CrossDJ iOS / Android application.
Notes: You have to purchase an in-app feature "external audio set" from CrossDJ in order to make it workable with XD101
Otherwise, you won't be able to select Mixer mode.
Follow below steps and get your tablet (iPad / Android) ready:
Step 1: Go to App store (iOS) or GooglePlay (Android) and download the MixVibes CrossDJ application.
Step 2: Play the app and connect your tablet earphone output to XD101's tablet input as indicated on above session.
Step 3: Place and rest your tablet on the XD101 cradle stand like below
Step 4: In the CrossDJ app, click setting icon
Step 5: In the setting page, click "advanced setting"
Step 6: At the "Mode" session, select Mixer
(Don't select Normal or Split or the crossfader won't work)
Step 7: After that, you could go back to main page and press the "+" on screen to import music to Deck A and Deck B
Step 8: After importing music to Deck A and B, you are ready to go!! Press the play and enjoy mixing with XD101!
Publicité
Table des Matières
