First Time Installation - Oceanic OCEALED1919B2 Guide D'utilisation

● The unit contains different setting menus. Once the initial programming is entered, it will be
remained in the memory until change, and the unit can always be operated under the same conditions.
● The settings will be remained in the memory until the settings are changed, even after setting the
player to standby mode.
Common procedure for initial settings
- Press MENU button on the unit or remote control to display the main menu.
- Press UP/DOWN/LEFT/RIGHT navigation buttons to move the cursor.
- Press OK or RIGHT navigation button to enter submenu.
- Press MENU button to save current setting and return to previous menu page.
- Press EXIT button to exit menu page.

First Time Installation

- Connect to power source and turn on this TV, then below setup page will display on the screen.
- Press UP/DOWN navigation button to move the cursor.
- Press LEFT/RIGHT navigation button to select an option.
Step 1
OSD Language: select the on-screen menu language.
Country: select your country.
Energy Model: select Home or Store mode.
Step 2
- When Step 1 finished, press OK to enter next page.
- Use UP/DOWN navigation button to highlight an option and press OK to enter subpage.
- Select Tune Type and Digital Type using navigation buttons and press OK to start auto tuning.
NOTE: Items following Digital Type are adjustable only when Digital Type is DVB-T / C and these items
vary for different digital type.
- Select an available input source.
NOTE: To play an external device, connect it to related terminal on TV back first.
VIII - First Time Installation
EN-19