Technical Data; Accessories - Worx WX026 Manuel D'instructions

1. HANDLE SLEEVE
2. HANDLE
3. ADJUSTING KNOB
4. HOOK
5. BRACKET SEAT
6. RUBBER PAD
7. BRACKET
8. FRONT COVER
9. ON / OFF SWITCH
Not all the accessories illustrated or described
are included in standard delivery.

TECHNICAL DATA

Type WX026 WX026.9(0- designation of
machinery, representative of Lamp)
Rated voltage
Charger voltage
8
Lumen
Machine weight
*Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.

ACCESSORIES

Battery Pack (2.0Ah
WA3551.1)
Charger(0.4A WA3760)
LED Worklight
WX026 WX026.9
20V Max*
100-240V ~ 50/60Hz
1500LM
1.8kg
2.2kg
WX026 WX026.9
1 /
1 /
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ACTION
BEFORE OPERATION
Charging the battery Pack
Installing the battery pack
Removing the battery pack
OPERATION
Starting & Stopping
To start your light just depress on/off
switch(1) marked "I" .
To stop your light just depress the
on/off switch(1) marked "O" .
WARNING! Do not direct the
light beam into your eyes.
Placing the light
WARNING! Ensure the
work light is securely
placed to prevent falling object
hazard.
Using the hook to hang the light
WARNING! Do not hang the
work light on any electrical
power cord!
Using the bracket to set the light
Add: You may use a screw to secure
the work light in place.
Using the bracket to hang the light
Adjustable head
The work light head can be set in a
variety of positions. To switch base
positions, rotate the adjusting knob to
loosen the light. Adjust head to desired
position , tighten the adjusting knob.
CAUTION! Do not place hands or
fingers between adjustable head and
bracket when positioning work light to
avoid any hazard!
FIGURE
See Fig. A
See Fig. B
See Fig. C
See Fig. D
See Fig. E
See Fig. F
See Fig. G
See Fig. H
EN