Grandstream GVC3210 Mode D'emploi page 4

INSTALLATION
The GVC3210 can be installed in the following two ways:
Option 1: Mount on TV/Monitor. TV/Monitor mount bracket is required.
Option 2: Mount on wall. Wall mount bracket is required.
The TV/Monitor mount bracket is plastic and comes as one piece
with integrated two magnets in order to hold the GVC3210.
The wall mount bracket is metal and comes as one piece.
INSTALLING BRACKET TO MOUNT THE GVC3210 ON TV/
MONITOR
1. Locate the TV/Monitor mount bracket in the package.
2. Put the Bracket Sticking Strip on the frame of the TV.
3. Put the bracket on the Bracket Sticking Strip and adjust the angle.
Note: Make sure the top of the bracket is in horizontal direction.
4. Lock the bracket and fix it on the TV.
5. Put the GVC3210 on the bracket and fix it by the bottom magnet.
1 2 3
INSTALLING BRACKET TO MOUNT THE GVC3210 ON WALL
1. Locate the Wall mount bracket in the package.
2. Fix the metal bracket on the wall using two plastic expansion pipes and two screws.
3. Put the GVC3210 on the bracket and fix it by the bottom magnets.
1 2
4 5
3
~ 3 ~
CONNECTING THE GVC3210
1. Connect the LAN port of the GVC3210 to the RJ-45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable.
Note: The GVC3210 supports Wi-Fi as well. It can be used to connect the
GVC3210 to the network.
2. Connect the HDMI [1] port of the GVC3210 to the HDMI port of the main display
device (e.g., TV) using the HDMI cable. Connect HDMI port 2 if you have addi-
tional display devices.
Note: Please make sure to follow the port order when connecting HDMI port 1 and
2. The GVC3210 will not work correctly if connecting HDMI port 2 without HDMI
port 1 connected.
3. Connect the 12V DC output plug to the power jack on the GVC3210 and then
plug the power adapter into an electrical outlet.
4. The LED Indicator in the front of the GVC3210 will show if the device is ready to
be used by changing the color from red to green.
Note: The display device (e.g., TV) will show the idle HOME screen with IP ad-
dress on the top status bar as well.
5. Insert your Micro SD card into the Micro SD card slot. The recording files will be
saved in the Micro SD card.
6. (Optional) Connect presentation device (e.g., a laptop) to the GVC3210 HDMI
IN port for presentation purpose during conference call.
7. (Optional) Connect USB accessory (e.g., mouse, keyboard, USB flash drive, ...
etc) to the USB port.
TOP
VIEW
Micro SD Card Interface
FRONT
VIEW
Reset
BOTTOM
VIEW
LED Indicator
Lens
Standard Tripod Hole:
to mount the GVC3210 on a Tripod.
~ 4 ~