Table des Matières
Publicité
Installing a contact mat
By using a contact mat, you can also be notified if your child gets out of bed. Just place
the mat in front of the crib, connect it to the baby monitor and it will tell you when
your child steps on it.
24
BE9026 Contact mat
(sold separately)
Technical information
Power supply
Battery power: 2 x 1.5 V AA (LR6) lithium or alkaline batteries.
Power consumption
Active < 70 mA, Idle position < 400 μA
Operating time
Alkaline ~ 6 months, Lithium ~ 1 year
Activation
Via the test buttons, microphone or a contact mat via the ext trig
Radio frequency
314.91 MHz, 433.92 MHz or 868.3 MHz depending on region
Maximum output power
4,7 dBm
Coverage
50 - 250m (55 - 273yd) depending on radio frequency. Coverage
is reduced by walls, large objects and other radio transmitters.
Number of radio keys
64 as standard. Up to 256 with optional software.
Additional information
Please note: Always make sure the baby monitor is out of the child's reach.
Never place the baby monitor in the child's crib or playpen.
Operation, transport and storage For information, see the Installer's Guide.
Maintenance and cleaning
Maintenance free. Clean with a dry cloth. Don't use household
cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives.
Safety and regulations
For information, see the Installer's Guide.
Service and support
For information, see the Installer's Guide.
EN
25
Publicité
Table des Matières
