Led Indicators And Control Panel - Beko WBI 1200 Manuel

LED indicators and control
panel
LED indicators in the front section of
your refrigerator are intended to help
you in monitoring the operation of your
appliance.
Keep your food in the refrigerator in a
safe manner by monitoring and using
these LEDs and controls as explained
below:
Quick Cool Button (1): Used to cool
the food quickly. Compressor may not
operate immediately but after some
time when the button is pressed and
this is quite normal.
Thermostat Setting Button (2): Used to
set your refrigerator between minimum
and maximum values.
Temperature Indicator (3): Displays the
inner temperature of your refrigerator.
Orange LED (4): Lights up when the
quick cool button on the LED panel is
pressed. In this case, your refrigerator
operates continuously.
Press the button again when the food
you would like to quick cool comes
to the desired temperature and the
orange LED will turn off.
Green LED (5): Lights up continuously
after plugging in your refrigerator.
Red LED (6): It warns you by lighting
up continuously when your refrigerator
starts to operate, if not enough cooling
effect is obtained, when the door of
your refrigerator remains open for a
long time and when excessive food is
loaded.
If the red LED lights up continuously
when the conditions stated in the
adjacent column do not exist, then call
our Authorized Service.
10
EN