Advanced Features; Application; Technical Characteristics - red lion IAMS 0001 Mode D'emploi

• Input for RTD, TC, Ohm, potentiometer, mA and V
• 2-wire supply > 16 V
• FM-approved for installation in Div. 2
• Output for current, voltage and 2 relays
• Universal AC or DC supply

Advanced features

• Programmable via detachable display front (PGMMOD00), process
calibration, signal and relay simulation, password protection, error diagnostics
and selection of help text in several languages.

Application

• Linearised, electronic temperature measurement with RTD or TC sensor.
• Conversion of linear resistance variation to a standard analogue current / volt­
age signal, i.e. from solenoids and butterfly valves or linear movements with
attached potentiometer.
• Power supply and signal isolator for 2­wire transmitters.
• Process control with 2 pairs of potential­free relay contacts and analogue
output.
• Galvanic separation of analogue signals and measurement of floating signals.
• The IAMS0001 and IAMS0011 have been designed according to strict safety
requirements and are thus suit able for application in SIL 2 installations.

technical characteristics

• When the devices are used in combination with the PGMMOD00 display /
programming front, all operational parameters can be modified to suit any
application. As the devices are designed with electronic hardware switches, it
is not necessary to open them for setting of DIP­switches.
• A green / red front LED indicates normal operation and malfunction. A yellow
LED is ON for each active output relay.
• Continuous check of vital stored data for safety reasons.
• 4­port 2.3 kVAC galvanic isolation.
6
IAMS 0001 / 0011 / 0010