Philips MX5100VR Guide De Démarrage Rapide page 2

continue...
OPEN
CLOSE
STANDBY -ON
SOURCE DVD VCR TUNER PLA Y STOP
Make sure your DVD system and
1
TV are connected and turned on!
STANDBY-ON
TIMER SET
SYSTEM AUDIO/
SUBTITLE ANGLE
MENU BAND
PROG
REC DISPLAY/STATUS/EXIT ZOOM
SKIP/ SKIP/
CLEAR
P - P +
TITLE MODE/SYSTEM RETURN
TUNER
DVD VCR
DISC/VCR
OK
MENU
4
STOP PLAY
5
REW FF
PAUSE
SLOW
1 2 3
SV / V+
4 5 6
SEARCH/INDEX
7 8 9
REPEAT REPEAT
+10 0
A-B
SURROUND SOUND VOLUME
Region Codes
ALL
DVDs must be
labeled for ALL
regions or for
Region 1 in order
1
to play on this
DVD system.
Helpful Hints
If a DVD does not play properly,
please contact Philips at 1-800-531-
0039 for assistance. Due to the
inconsistency of disc formats provided
by various disc manufacturers, your
DVD system may require a playability
enhancement or upgrade. As DVD
technology advances, these
enhancements will become common
and will be easy to complete.
Detailed playback features and additional functions are described in the
01-MX51-37 QUG-Eng1 2
SUPER VIDEO
STOP/EJECT
J AZZ CLASSIC
POP OPTIMAL
TIMER RECORD PLA Y HEADPHONE VIDEO AUDIO VOL
REC
IR
SURR
3
Playing a disc
1
2 2
Press STANDBY ON 2 2 2 on the front of the System or its remote to turn on
the power.
2
Turn on your TV. Select the correct Video In channel (AV1, VIDEO, etc.) at the TV. Your
TV remote may have a VIDEO button that selects the Video In channel. If not, go to your
lowest TV channel (1 or 2). Then press the Channel down button on your TV
until you see the DVD screen on the TV (if no Disc is in the System).
3
Press OPEN•CLOSE 0 at the front of the DVD system, load a disc in the tray
with the disc label is facing up. For double-sided discs, load the side you want to play face
up. Press OPEN•CLOSE 0 again to close the disc tray.
4
Playback will start automatically, if not press PLAY B.
If a disc menu appears, use 3 4 1 2 and OK buttons on the remote (or the Number
buttons) to select features or start play from the menu. Follow the instructions in the Disc
menu. See the Owner's Manual for more Disc features.
5
To stop playing the Disc, press the STOP 9 button.
Setting Up the DVD system for the
First Time
1
Turn on the TV and select the correct Video In
mode.
2
Press STANDBY-ON 2 2 to turn on the DVD 2 2 2
system, then press VCR.
3
Press 3 or 4 to select the desired language for
DVD system displays. Then press B.
4
Press P+ to start the automatic tuning process. The TV station stored
may vary according to the area you live in.
Note: After setting the AUTO TUNING process, the DVD system will memorises
all the active channels even after you unplug the AC plug or power failure.
No picture!!
Check the AV (Audio/Video) mode on your TV.
* Usually this channel is between the lowest and highest channels and may be called FRONT,
A/V IN, or VIDEO.
* Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until
you see the Video In channel.
* Or, your TV remote control may have a button or switch that chooses different video modes.
* Do not use channel 3 or 4 on the TV unless you are using an RF modulator.
* See your TV manual for more details.
accompanying owner's manual.
2
DVD Mode
Before using the
LANGUAGE SELECT
remote control for
DVD features,
ENGLISH
FRANÇAIS
press the DVD
ESPANOL
button on the
remote. The
System must be in
DVD mode. The
DVD light will
appear on the front
of the System.
6/04/2004, 3:52 PM