Publicité
Les langues disponibles
Les langues disponibles
H aik u B a mbo o LED L i ght Ki t ( c o nt. )
Step 2. Install LED mounting bracket
Do not touch the LEDs or electronics during installation!
!
Secure the LED light mounting bracket to the fan hub with (4) M4 x 8 screws as shown. The bracket
should be positioned so that the cutout surrounds the wiring receptacle in the circuit board (located on
the fan hub) to allow space for connecting the wiring harness.
Step 3. Install LED light module
Install the LED module with (4) M4 x 8 screws, ensuring the blue wires and wiring harness remain
positioned through the square hole on the LED module. Plug the wiring harness into the receptacle on
the fan circuit board.
Wiring
Harness
2
All manuals and user guides at all-guides.com
HAIKU
Cutout
by BIG ASS FANS
®
©2012 DELTA T CORP. ALL RIGHTS RESERVED.
Mounting
Bracket
LED
module
Publicité
