Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
Ha ik u
Ensure power is disconnected before installing the LED light kit.
!
Review the safety guidelines in the complete Haiku installation guide. If you have questions about any
aspect of the installation process, contact Haiku Technical Service for assistance.
Parts and hardware
If you are missing any parts or hardware required for the installation of your Haiku, contact Haiku
Technical Service. Note: Drawings below are not to scale.
LED Mounting Bracket
*A white lens and a black lens are included in the kit. Install the white lens for maximum light emission. Install the
black lens for dimmer light emission.
Installation
Follow the steps below to install the LED Light Kit on your Haiku fan.
Step 1. Removing the lower cover
tip!
Retain the lower cover for future use.
Remove the lower cover from the fan hub. Be careful not to damage the tabs.
©2012 DELTA T CORP. ALL RIGHTS RESERVED.
All manuals and user guides at all-guides.com
HAIKU
B ambo o LED L ight Kit
®
LED light module
Lower
Cover
by BIG ASS FANS
®
(8) M4 x 8 screw
(2) Lens cover
1
Publicité
Manuels Connexes pour Haiku Bamboo
Sommaire des Matières pour Haiku Bamboo
- Page 1 Haiku Technical Service for assistance. Parts and hardware If you are missing any parts or hardware required for the installation of your Haiku, contact Haiku Technical Service. Note: Drawings below are not to scale.
- Page 2 All manuals and user guides at all-guides.com HAIKU by BIG ASS FANS ® H aik u B a mbo o LED L i ght Ki t ( c o nt. ) Step 2. Install LED mounting bracket Do not touch the LEDs or electronics during installation! Secure the LED light mounting bracket to the fan hub with (4) M4 x 8 screws as shown.
-
Page 3: Operating The Light
Operating the light Do not stare directly into the light! The Haiku light accessory operates independently from the fan, providing a variable level of illumination that is increased or decreased by pressing the Up or Down Light button on the remote. -
Page 4: Kit D'éclairage Led Haiku
S'assurer que l'alimentation principale est déconnectée avant d'installer le kit d'éclairage LED. Revoir les consignes de sécurité dans le guide d'installation complet Haiku. Si vous avez des questions sur tout aspect du processus d'installation, contactez le service technique d'Haiku pour recevoir de l'assistance. -
Page 5: Kit D'éclairage Led Haiku® Bamboo (Suite)
HAIKU par BIG ASS FANS ® Kit d'éclairage LED Haiku® Bamboo (suite) Étape 2. Installation du support de montage LED Ne pas toucher les LED ou les composants électroniques au cours de l'installation ! Fixer le support de montage de l'éclairage LED au moyeu du ventilateur à l'aide de (4) vis M4 x 8, comme indiqué. -
Page 6: Étape 4. Installation Du Couvre-Lentille
Fonctionnement de la lumière Ne pas regarder directement dans la source de lumière ! Le dispositif d'éclairage Haiku fonctionne indépendamment du ventilateur et offre un niveau d'éclairage variable qu'on augmente ou diminue en appuyant sur la touche lumière Up ou Down de la télécommande.