Operation; Control Panel; High Temperature Alarm - Electrolux EUF2040AOW Notice D'utilisation

6 www.electrolux.com

3. OPERATION

3.1 Control panel

Alarm light
1
FastFreeze indicator
2
Power indicator light
3
3.2 Switching on
Insert the plug into the wall socket.
Turn the temperature regulator clockwise
to a medium setting.
The power indicator light and the alarm
light will light up.
3.3 Switching off
To turn off the appliance, turn the
temperature regulator to the "O" position.
3.4 Temperature regulation
The temperature is regulated
automatically.
A medium setting is
generally the most suitable.
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance
depends on:
• room temperature,
• how often the door is
• the quantity of food
• the location of the
All manuals and user guides at all-guides.com
1
opened,
stored,
appliance.
2 3
5 4
Temperature regulator
4
FastFreeze button
5
1. Turn the Temperature regulator
toward lower settings to obtain the
minimum coldness.
2. Turn the Temperature regulator
toward higher settings to obtain the
maximum coldness.
CAUTION!
If the ambient temperature is
high or the appliance is fully
loaded, and the appliance is
set to the lowest
temperatures, it may run
continuously causing frost to
form on the rear wall. In this
case the dial must be set to
a higher temperature to
allow automatic defrosting
and therefore reduced
energy consumption.

3.5 High temperature alarm

In the event of an abnormal temperature
rise inside the freezer (e.g. power cut)
alarm light comes on.
When normal conditions are restored the
alarm light will switch off automatically.