Table des Matières
Publicité
MATÉRIEL NÉCESSAIRE (TAILLE RÉELLE)
M12-1.75 X 75mm HEX HEAD BOLT
18-7182-00
QTY.1
M12-1.75 HEX LOCK NUT
28-6805-00
QTY.1
TOOLS NEEDED
19mm
19mm
WASHER M12 X 24mm OD
28-6804-00
QTY.2
19
LES ÉTAPES SUIVANTES NÉCESSITENT 2 PERSONNES.
NOTE
Rotate the Upper & Lower Actuator braces in position
and have second person hold Actuator in place as
shown. Attach Actuator to both brackets and tighten
hardware about 3/4ths of the way. Leave loose
enough to attach additional parts in later steps.
Publicité
Table des Matières
