Package Contents - i-tec USB-C/A Dual Display Docking Station Mode D'emploi

Quick Start / USB 3.0/USB-C Dual Display Docking Station
INTRODUCTION
Thank you for purchasing the i-tec Docking Station, our product allows you
to connect your favourite devices via a single USB cable to a laptop or tablet
with a USB-C or USB-A port. The docking station provides 2x HDMI port and
2x Display Port (only 2 graphics outputs can be active at the same time),
1x Ethernet GLAN RJ-45 port, 6x USB-A 3.0 port, 2x Audio port (earphones
and microphone), 1x input for external power supply and On/Off switch.
An advantage is the ability to connect a docking station to a USB-A 3.0
or USB-C port on your laptop / tablet.

PACKAGE CONTENTS

• i-tec USB-A 3.0 / USB-C Docking Station
• Cable USB-C 3.1 to USB-C (90 cm)
• Cable USB-C 3.1 to USB-A (90 cm)
• Power adapter (output DC: 20.0V/2.0A, DC cable 110 cm)
• Quick Start
DESCRIPTION
Front panel:
1. 4x USB-A 3.0 port for connecting USB 3.1/3.0/2.0 devices and high-
speed data transmission up to 5 Gbps; supports USB Hot Swapping
function
2. LED indication
3. Separated microphone input and earphone output, 1x 3.5 mm Audio out
5.1, 1x 3.5 mm Mic in
Rear panel:
4. On/Off switch for the docking station switching on and off
5. Power supply input – external power adapter (output: DC 20.0V/2.0A)
External power supply exclusively for use with CADUAL4KDOCK.
EN
5