Brew Strength Selection; Automatic Start Brewing Coffee; Setting The Duration Of The Keep Warm - Bella 14346 Manuel D'instructions

been reached, press the
5. The coffee maker will automatically switch from AM to PM once the hour passes 12.
6. If a mistake was made or to exit the clock setting mode, wait 15 seconds and the LCD will show the last
clock setting.

Brew strength selection

Gourmet strength coffee.
The gourmet setting adjusts the brewing cycle of a full pot of coffee to extract a higher percent of soluble. This
results in a more flavorful pot of coffee.
Bold strength coffee
The Bold setting adjusts the brewing cycle of a full pot of coffee, allowing more time for the coffee to "steep" to
extract further oils and flavor from the coffee bean. This results in a bolder tasting pot of coffee.
1-4 cup brew cycle
Automatically adjusts the brewing process for maximum flavor when brewing small quantities. Ideal for brewing
1 to 4 cups of coffee.
* If 12 cups of water are poured into the water tank then 12 cups of coffee will brew.
1. Press button once to enter into the Brew strength selection mode. The LCD will flash
or *The Canadian version will show
buttons. The default setting is Regular which is
coffee maker will beep.
2. To select Gourmet strength coffee, press
The LCD will flash strength. Use the
push button. The coffee maker will beep.
3. To select Bold strength coffee, press
The LCD will flash strength. Use the
push button. The coffee maker will beep.
4. To select the 1-4 cup, press and hold the

Automatic start brewing coffee

U.S. VERSION: Press button once, the LCD screen will display
once, the LCD screen will flash the
time is 12:00 AM. Follow the "Setting the clock" to set the HOUR and the MINUTE. After completion of setting
the pre-set clock, the coffee maker will beep and display the auto-start time for 3 seconds before switching to the
current time. The LCD will also display the
auto brew, the coffee maker will start the brewing cycle.
To cancel the automatic start brewing cycle; simply push on the
disappears.
Remembering your Automatic Start Brew Preferences
Press and hold the button for 3 seconds to recall the last automatic start brew settings that were programmed.
The or icon will appear. The coffee maker will begin to brew coffee at the pre-set time. To cancel, press
and hold button for 3 seconds and the
Pause and Serve
If you wish to serve a cup of coffee before the brew cycle is completed, simply remove the carafe from the keep
warm plate. Dripping will automatically cease. Return the carafe onto the keep warm plate; dripping will resume.
CAUTION: To prevent injury when utilizing the pause and serve feature, replace carafe within 30 seconds after
removing during the brewing process.
1. After approximately 2 cups of coffee have been brewed, the carafe may be slowly removed and the coffee
will stop dripping.
2. The flow valve is located on the bottom of the filter holder and is activated when the carafe is removed.
This design makes it possible for you to remove the carafe and pour a cup of coffee before the entire
carafe is brewed.
IMPORTANT: When replacing the filter holder, the flow valve must be properly inserted into the front hole of the
machine, so that it can be seen as it sits on the top of the carafe lid.
3. When using this feature, make sure that the carafe is replaced under the filter holder within 30 seconds to
prevent overflow.

Setting the Duration of the Keep Warm

Press button once, the LCD will display "2:00" and
Depending on the Country the unit was purchased, U.S. or Canada, please refer to "Control Panel" on page 4.
*
SO-311745_14381, 14398_Evolution 12 Cup Programmable Coffee Maker IM_r8.indd 6
All manuals and user guides at all-guides.com
button to confirm. One beep can be heard and the set time will appear.
. To choose between strengths, push the
button to enter into the Brew strength selection mode.
and buttons until
button to enter into the Brew strength selection mode.
and buttons until
button. One beep can be heard and the LCD will display
icon. The previously set hour will flash (last saved). The default future brew
or icon. Once the current time reaches the set time for the
or icon will disappear.
6
. To confirm the selection push
is selected. To confirm the selection
is selected. To confirm the selection
. CANADIAN VERSION: Press
button once more until the
or icon will flash. The default keep warm time
. and
and
button. The
.
button
or icon
2014-10-14 4:45 PM