Belkin AirCast Auto Mode D'emploi page 7

InITIAl seTUp
sections
table of contents
pair your phone:
1. Press and hold the button until the light ring starts flashing . The
button light will briefly turn off before it starts flashing . Do not
release the button until it starts flashing .
2.
On your phone, go to the Bluetooth settings menu .
3. Make sure Bluetooth is turned on .
4. On some phones, set your Bluetooth to search for
new connections .
5. Select the AirCast Auto from the list of accessories .
6.
If asked for a pass code, type in "0000" .
7. When paired successfully, the light ring will turn solid blue .
8. Some phones may ask if you want to connect . Select "Yes" .
pairing with a different phone:
Only one phone can be paired to the AirCast Auto at any one time . To
pair a different phone:
1. Put the AirCast Auto into sleep mode by pressing and holding
the button until the light ring turns off, and then immediately let
go of the button .
2. Repeat the pairing instructions listed previously .
AirCast Auto
1 2
5
3 4 5 6 7