Using The Remote Control; Preparing The Remote Control For Use; Installing The Remote Control Batteries; Using The Remote Control To Operate Your Other Devices - Toshiba ColorStream 32A36C Manuel Du Propriétaire

Using the remote control

Preparing the remote control for use

With the remote control, you can operate your TV, most VCR and DVD
player models, and cable TV converters together, even if they are
different brands. If you will be using your TV with a Toshiba VCR or
DVD player, your remote control is already programmed and ready to
use. If you own different brands of VCRs, DVD players and/or convert-
ers, you first have to program your remote control. (See "Programming
the remote control to operate your other devices" on page 12.)

Installing the remote control batteries

To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Install two "AAA" size batteries. Match the + and – signs on the
batteries to the signs on the battery compartment.
3. Close the battery cover on the remote control until the lock snaps.

Using the remote control to operate your other devices

To control a VCR:
Program the remote
control to recognize
the brand of your VCR
(see "Programming the
remote control to
Numbers
operate your other
devices" on page 12).
The buttons shown at
right will then control
Channel +/–
the VCR. Press the
VCR button first.
(Channel Return)
Fast Forward
VCR CH L/M
Pause/Still
J3N51821A(E)_P07-16 11
All manuals and user guides at all-guides.com
VCR
POWER
TV VCR CABLE
Power
DVD
1 2 3
+10
4 5 6 100
Channel
7 8 9 0
CH +
VOL VOL
MENU/
– +
ENTER
CH –
EXIT RECALL TV/VIDEO FAV
CH RTN
VOL CH RTN FAV
RESET CAP/TEXT 1/2
DISPLAY DVD CLEAR TOP MENU DVD MENU
CODE MTS SLEEP MUTE
Play
REW PLAY FF
Rewind
TV/VCR STOP PAUSE/STILL
TV/VCR
REC
VCR CH
Record
DVD SKIP
Stop
11
Note:
The TV remote control may not operate your
VCR, DVD player, or cable TV converter.
Refer to the owner's manual supplied with the
applicable equipment to see which features
may be available. Additionally, the remote
control for this TV may not support certain
features available on the original remote
controls for such additional equipment, in
which case, it is suggested that you use the
original remote control for the applicable
device.
Caution:
• Never throw batteries into a fire.
Notes:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated
disposal area.
• Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
• When necessary to replace batteries in the
remote control, always replace both
batteries with new ones. Never mix battery
types or use new and used batteries in
combination.
• Always remove batteries from remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
To control a DVD player:
Program the remote
Power
control to recognize the
brand of your DVD player DVD
(see
Number
"Programming the remote
buttons
control to operate your
DVD MENU
L/M/ /
other devices" on page
Enter
12). The buttons shown at
right will then control the
DVD player. Press the TOP Menu
Volume
DVD button first.
L/M (TV)
DVD Clear
Display
Fast Forward
Rewind
DVD Menu
Stop
DVD Skip /
Pause/Still
3/3/06, 11:22 AM
POWER
TV VCR CABLE
DVD
1 2 3
+10
4 5 6
100
7 8 9 0
CH +
VOL VOL
MENU/
– +
ENTER
CH –
EXIT RECALL TV/VIDEO FAV
VOL CH RTN FAV
RESET CAP/TEXT 1/2
DISPLAY DVD CLEAR TOP MENU DVD MENU
MTS MUTE
CODE SLEEP
Play
REW PLAY FF
TV/VCR STOP PAUSE/STILL
REC
VCR CH
DVD SKIP