Assembly Instructions - Insignia NS-HWMG1754G Mode D'emploi

ASSEMBLY INSTRUCTIONS

Step 1: Preparing the TV stand body
Caution: Assemble your stand on a carpeted floor or on the empty box to avoid scratching your stand.
1 Place the TV Stand Body (M1) upright on the floor.
2 Pull the front of the body away from the back of the body until the hinged sides are straight.
Note: We recommend having two people to assemble your TV stand.
3 Screw five shelf support posts (M13) into the pre-threaded holes in the back and front frame. Use the holes that
provide the equipment clearance you need.
4 Screw two 7 mm screws (M5) into the bottom edge of both wood sides (M2) to the depth of the threads.
6
Back
You'll need:
M5 (4)
www.insigniaproducts.com
Metal, Glass, and Wood Finish TV Stand
Meuble pour téléviseur en métal et en verre à finition bois
Front
M5
M13 (5)
M1
M2
M5