Scan Setting - Eurotops Stereo Digi+ Notice D'utilisation

Time - Screen off – Language - Factory reset - SW version
3.4.1.6.1
Time
1. After entering system menu, press
flashes.
2. Press 【◀ or ▶】to adjust. Press
3. The minutes digit flashes. Repeat step 2 to set the minutes. The day flashes.
4. Repeat step 2 to set the day, month and year.
5.
Then press 【◀ 】to enter date format. Repeat step 2. Note : To read the options
proposed, note that D=Day, M= Month, Y=Year.
6. Press【◀ 】to enter hour format : 12/24H. Press ◀ or ▶】to choose. Press
7. For auto update, repeat step 6. The options are "No update" or « Update from FM, DAB
mode or any of them ». Note: This DAB radio can automatically synchronize its clock with a
DAB or FM radio station that transmits time signals after performing an update. The next
time you will do the scanning, the update will be done according to the selected option.
3.4.1.6.2
Screen off:
Choose "OFF" (the screen will be permanently on) or "ON" (the screen will be OFF 5 seconds later).
3.4.1.6.3
Language system: English, German, Italian and French.
3.4.1.6.4
Factory reset
Choose «yes » or « no » factory reset. Yes : (EP712) The factory default settings will be
restored and the radio will perform a scan of the available station radios.
3.4.1.6.5
System version
3.4.2
FM MENU
1. In FM mode, press and hold【
2. Press 【◀ or ▶】to choose the desired menu: Scan setting/ Audio setting/ System.
【OK】
3. Press
3.4.2.1

Scan setting

This function allows you to tailor which stations will be detected when performing a scan.
For scan setting, choose
only » (stations with strong signals only).
3.4.2.2 Audio setting (Stereo/ Mono)
Choose between « Stereo allowed' (only stations with strong enough signal broadcasting
in stereo will be played) and « Forced mono » (ALL stations in mono regardless of the
availability of a stereo signal will be played.).
【OK】
= Display of the information about software version
】enter FM menu list.
to enter.
« All stations » (all stations with strong or weak signals) or « Strong stations
twice to enter time setting. The hour digit
【OK】
to confirm.
6
【OK】
.