resideo RTH221B1047 Manuel Du Propriétaire page 13

Program schedule override (temporary)
Press or to immediately adjust
s t
the temperature. This will temporarily
override the temperature setting for
the current time period.
"Temporary" will appear on the display
and the current program period will
flash.
The new temperature will be
maintained only until the next
programmed time period begins (see
page 11).
To cancel the temporary setting at any
time, press RUN.
NOTE: Make sure the thermostat is
set to the system you want to control
(heat or cool).
Program schedule override (permanent)
Press HOLD to permanently adjust
the temperature. This will override
the temperature settings for all time
periods.
The "Hold" feature turns off the
program schedule and allows you to
adjust the thermostat manually, as
needed.
Whatever temperature you set will
be maintained 24 hours a day, until
you manually change it, or press
RUN to cancel "Hold" and resume the
program schedule.
NOTE: Make sure the thermostat is
set to the system you want to control
(heat or cool).
13
Temporary
6 : 30
70
Set
am
Wake
M32708
6 : 30
75
Set
am
M32709
6 : 30
70
Set
am
M32710
6 : 30
75
Set
am
M32709
Hold