Cleaning And Maintenance - May Way SP - 30GL Notice D'installation Et D'emploi

Comments and recommendations
Use the device only under supervision.

CLEANING AND MAINTENANCE

Clean the device daily. Remove stainless grid, you can wash the grid in the dishwasher. Stainless parts wash
with moist cleaning cloth and detergent without groove parts then splash it with clean water and dry it by the
cloth.
Advices for cleaning specific parts.
Burners: Remove upper part of the burner and flame devider, put it in warm water to soak out and wash it
carefully, take care, not to get water or dirt inside, because the nozzle could block.
MAINTENANCE
We recommend you to have the device checked once a year by proffesional service. Only qualified or competent
persons can do interventions in the product.
It may be necessary to exchange some parts during the useful life of the device:
piezzo electrode, sensor of the thermofuse
Exchange of the piezzo electrode or thermofuse sensor: picture D
Screw up and remove the bottom cover (A), detach and demount the piezzo electrode (B) or the thermofuse
sensor (C). The fitting up of new part must be done in the contrary.
WHAT TO DO IN CASE OF BREAK-DOWN?
Switch off the gas feeder and call seller´s proffesional service.
The way of usage and liquidation of the litter.
Wrapping - sell it to the salvage.Wrapping foil - give into the salvage containers for plastic. Liquidation of the
device after useful life: „Sell the device and it´s parts to the salvage."
INDICATION
Guarentee does not cover all consumption parts succumable to common wear (rubber seals, bulbs, glas and
plastic parts etc.). The guarantee does not refer to the devices which were not instaled in correspondance with
instructions - by qualified worker, in confirmity with standards and when somebody handled incompetently the
device (interventions into inner equipment) or the device was operated by nonqualified staff or at variance with
instructions for use. Guarantee does not also cover the damages caused due to influance of nature or other
outer intervention.
1
2
Piezzo knob
1
Regulation knob
2
0
6
Switch off
Switch on the main
burner
Sporo (lower
performance)