Using Vox Mode (Voice Trigger) - Lorex Baby SWEET PEEP Mode D'emploi

Using VOX Mode (Voice Trigger)

In VOX mode, the monitor's screen and speaker
will turn off after a minute unless sound is
detected at the selected sensitivity level. This
conserves battery power, and alerts you only
when needed.
Press and hold
1
item is shown.
2
Press until VOX
is shown
Press and
3
sensitivity for VOX mode.
VOX OFF
VOX
Low sensitivity
Medium sensitivity
If you want softer noises to trigger the monitor (such as a
faint whimper), set the sensitivity setting higher. If you only
want louder noises to trigger the monitor (such as a loud
cry), set the sensitivity setting lower.
4 Press to exit menu.
While VOX is activated, the monitor's
screen and speaker will turn off after a
minute unless sound is detected at the
selected sensitivity level. Press any button
to turn the screen back on. When VOX is
on, a VOX icon is shown on the screen.
VOX mode will not work while
Scan mode is activated.
until the first menu
VOX OFF
to adjust the audio
VOX mode is off
VOX mode is on
High sensitivity
17