Publicité
Les langues disponibles
Les langues disponibles
1. PRECAUTIONS AND SAFETY MEASURES
• Do not use HOT STICK to operate the AT-6000-RE Receiver around voltage more than 600V.
• Remove the batteries if the Meter is not used for an extended period of time, or if
stored in temperatures above 50 °C (122 °F). If the batteries are not removed, battery
leakage can damage the Product.
• Do not use the Product to check for absence of voltage. Please use a voltage tester instead.
This manual contains information and warnings that must be followed for operating the
Product safely and maintaining the Product in a safe operating condition. If the Product is
used in a manner not specified by the manufacturer, the protection provided by the Product
may be impaired. This Product meets water and dust protection IP40 per IEC60529. Do not
use in rainfall! The Product is double insulated for protection per EN61010-1:2010 3rd Ed to
CAT III 600 V.
CAUTION: Do not connect the Transmitter to a separate ground in Electrically Susceptible
Patient areas of a health care facility. Make the ground connection first and disconnect it last.
2. KIT COMPONENTS
Your shipping box should include:
AT-6000-RE RECEIVER
AT-6000-TE TRANSMITTER
TL-7000-EUR TEST LEAD AND ACCESSORY KIT
ADPTR-SCT-xx Socket-check adapter
CC-6000-EUR HARD CARRYING CASE
USER MANUAL
RECHARGEABLE BATTERY
BATTERY CHARGER
CT-400-EUR SIGNAL CLAMP
1.5 V AA (IEC R6) BATTERY
*TL-7000-EUR test lead and accessory kit includes:
• 2 x 1 m test leads (red, black)
• 1 x 7 m test lead (green)
• 2 test probes (red, black)
• 2 x alligator clips (red, black)
Optional Accessories:
HS-1 MAGNETIC HANGER
TL-7000-25M TEST LEAD 25m LONG
AT-6020-EUR KIT
1
1
1
1
1
1
-
-
-
12
4
AT-6030-EUR KIT
1
1
1
1
1
1
12
3
1
-
Publicité
