DS Produkte Z 07211 Mode D'emploi page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CAUTION!
Danger of burns! The housing of the toaster becomes hot during use! Only
touch the device by the handles and buttons which are provided for this
purpose!
Do not place the device in the vicinity of or under fl ammable objects (e.g.
curtains)
Before using the toaster, make sure the crumb tray is inserted completely.
With a piece of conventional wheat toast or thick slices, burning and the
development of smoke may result if the toasting setting is too high. In this
case, abort the toasting process immediately by pressing the Stopp (cancel)
button.
1. Insert a slice of bread into each of the toasting slots. Do not use slices which
are too thick. The bread must not become wedged.
2. Use
the
rotary
tween
level
1
and stage 6 (strong toasting; very strong degree of browning).
Please note: If you use the device over a prolonged period, the slices
which are put into the device later on will be darker than the fi rst slices
when the same toasting setting is used.
3. Press down the lowering lever until it engages audibly. (The lowering lever
only clicks into place if the device is connected to a power socket.) The
bread is lowered and the device switched on. During toasting the Stopp
(cancel) button lights up.
4. If necessary, select the Auftauen (defrost) or Aufwärmen (reheat) func-
tions (see the "Toasting Frozen Bread" and "Warming up Bread" section).
5. After the end of the toasting process, the bread and the lowering lever are
automatically raised and the device switches itself off. The Stopp (cancel)
button goes off.
6. Remove the bread carefully from the toasting slot. As you do this, do not
touch the hot metal surfaces in the area of the toasting slots! There is
a danger of burns!
With small bread slices, the lowering lever can also be used to lift out the toast.
Push the lever all the way up to facilitate removing the bread slices.
Cancelling the Toasting Process
As soon as the toasting process has started, the Stopp (cancel) button lights up.
Press this button to cancel the toasting process prematurely. The bread is raised
and the Stopp (cancel) button goes off.
07211_DE-GB-FR-NL_A5_V2.indb 19
07211_DE-GB-FR-NL_A5_V2.indb 19
All manuals and user guides at all-guides.com
19
knob
to
set
the
desired
(light
toasting;
very
light
EN
toasting
setting
be-
degree
of
browning)
20.07.2015 09:20:22
20.07.2015 09:20:22

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hy-6107

Table des Matières