Kronos pH/ORP Manuel D'installation page 10

Paragraph 9 – Flow Alarm
Programming
PROG
Config.
Alarms
Flow
Paragraph 10 – Level Alarm
Programming
PROG
Config.
Alarms
Flow
Paragraph 11 – Setting the Pause
Programming
PROG
Config.
Paus
N.Open
0000138014
Flow
Off
Flow
On
FlowConf
N.Open
Alarms
Flow
Flow
Off
Flow
On
FlowConf
N.Open
Alarms
Flow
Paus
N.Closed
This allows you to activate (deactivate) the flow sensor.
When activated (On), press the
as N. Open or N. Closed.
Press the key to return to the main menu.
Confirm and return to the main menu by pressing the
key.
This allows you to activate the level sensor alarm, which
means that you can decide whether to stop the dosage
(Stop) or simply activate the alarm signal without stopping
the dosage.
Changes can be made by pressing the
using the key to set the alarm type. Confirm by
pressing the
When activated, press the
Open or N. Closed.
Press the key to return to the main menu
Confirm and return to the main menu by pressing the
key.
Remote input to pause the pump.
By default, the system is set to Normally Open.
Press to access the item, and then press
the value (N. OPEN or N. CLOSED).
Press to confirm and return to the main menu.
rev. 1.0 EN
Operation
key to set the sensor
Operation
key.
key to set the sensor as N.
Operation
key, then
to set
8