Honeywell HWBAP1052 Serie Manuel D'utilisation page 8

US AP 2016/09/19
PERFORMANCE DATA SHEET
Do not use with water that is unsafe or of unknown quality without adequate disinfection
before or after the system.
While testing was performed under laboratory conditions, actual performance may vary.
This system has been tested according to NSF/ANSI 42 for bacteriostasis.The
concentration of the indicated substances in water entering the system was unchanged
under the permissible limits for water leaving the system, as specified in NSF/ANSI
42.
Influent Challenge Challenge requirement*
Native bacteria in water +/-20%
3 5
Influent Challenge Concentration of 1.0 x 10 CFU/ML - 1.5 x 10 CFU/ML, actual
*
levels remained the same within a variation from -9.57% to 2.82%