User Manual - jaz RollingStone TWS Sopop Mode D'emploi

UK
INSTRUCTION MANUAL
Charging the earbuds
Insert the earbuds into the charging case, the LEDs will light up.
Once charging is complete, the LEDs will turn off.
Charging the case
Insert the Type C connector of the supplied cable into the Type C
port on the case and the other end into a USB port.
The LED on the case will start flashing during charging.
Powering on earbuds
Remove the earbuds from the charging case: they will automatically
turn on and pair with each other, or press both MLF buttons on the
earbuds for 3 seconds.
Turning off the earbuds
Insert the earbuds into the charging case: they will turn off
automatically,
When the earbuds are not paired with a device and are out of the
charging case, they will automatically turn off after 2 minutes,
Or press the MLF button on one of the earphones for 5 seconds.
Pairing with a device
1. Take the earbuds out of the charging case: they will automatically
turn on and pair with each other.
2. Turn on Bluetooth on the device and search for "JAZ Sopop" in
the list of available devices, then select it.
3. After the first pairing with the device (if Bluetooth is turned on)
the earbuds will automatically pair each time they are removed
from the case.
Commands
Command
Play/pause music
Voice assistant
Previous track
Next track
Answer call
End call
Reject incoming call
Volume +
Volume -
4
Action
1 tap
Hold
3 taps
3 taps
1 tap
1 tap
Hold
2 taps
2 taps
Button
Left / right
Left / right
Left
Right
Left / right
Left / right
Left / right
Right
Left