Networking Settings For Windows Vista; Configuring Internet Explorer 5 And 5.5 - Eminent EM8026 Mode D'emploi

All manuals and user guides at all-guides.com
12 |
EMINENT ADVANCED MANUAL

Networking settings for Windows Vista

1. Click on the Windows Vista logo (start button).
2. Choose 'Configuration screen'.
3. Choose 'Show network status and –tasks'.
4. Choose 'Control network connections'.
5. Right-click on 'LAN-connection'.
6. Choose 'Connect.
7. If windows asks for your permission: choose 'Continue'
8. Windows Vista now connects your LAN-connection.
9. Right-click on 'LAN-connection'.
10. Choose 'Properties'.
11. If windows asks for your permission: choose 'Continue'.
12. Select 'Internet Protocol version 4 (TCP/IPv4)'.
13. Click on 'Properties'.
14. Choose 'Obtain IP Address automatically.'
15. Choose 'Obtain DNS Server address automatically'.
16. Click 'OK'.
17. Click 'Close'.
18. Windows Vista will now set-up your connection.

Configuring Internet Explorer 5 and 5.5

1. Start Internet Explorer.
2. Click 'Stop'.
3. When asked to establish a connection, press 'Cancel'.
4. Click 'Extra'.
5. Click 'Internet options'.
6. Click the 'Connections' tab.
7. Click the 'LAN settings' tab.
8. Uncheck 'Find Explorer settings automatically'.
9. Uncheck 'Use configuration script'.
10. Uncheck 'Use proxy-server'.
11. Click 'Ok'.
12. Remove dial-up connections by pressing 'Delete'.
13. Click 'Settings' to start the 'Internet' Wizard.
14. Select 'I would like to connect through a LAN network'.
15. Click 'Next'.
16. Check 'Automatically detect proxy-server'.
17. Click 'Next'.
18. Click 'No'.
19. Click 'Next'.
20. Click 'Complete'.
21. Close all Windows that are currently open.
22. Restart your PC.