Dynex DX-R24TV Guide De L'utilisateur page 37

Using your TV
5 If your time zone uses daylight savings time, press
6 Press EXIT to return to the normal screen.
Note: If the Auto Clock setting does not set the clock to the correct time, set the time
To set the clock manually:
1 Press MENU. The MAIN MENU opens.
2 Press
CLOCK menu opens.
3 Press
4 Press
5 Use the number buttons to set the current time.
6 Press EXIT to return to the normal screen.
Setting the On Timer and Sleep Timer
This feature allows you to have the television automatically turn on at a predetermined time.
Notes:
To set the On Timer:
1 Press MENU. The MAIN MENU opens.
or to turn the setting to ON.
manually.
or to select CLOCK, then press or to enter the CLOCK menu. The
or to select AUTO CLOCK, then press
CLOCK
ON TIMER
CLOCK
DST
AUTO CLOCK
ZONE
or to select CLOCK, then press VOL+ to select AM or PM.
- The On Timer only works if the current time has been set.
- The TV must be in Standby mode for the On Timer to work.
- If the TV loses power, the On Timer setting is cleared and must be reset.
or to select DST, then press
or to turn the setting to OFF.
--:--AM
9:10AM
OFF
OFF
PACIFIC
37