Buttons And Connections; Menu Button - Defender STEALTH1 Manuel D'instructions

BUTTONS AND CONNECTIONS

IMITATION MOTION SENSOR - FRONT
1
1. Pinhole Camera:
2. POWER Switch:
3. SD Card Slot:
4. VIDEO OUT Jack (RCA):
5. NTSC/PAL Switch:
6. FULL STOP/OVERWRITE:
7. POWER Input:

8. MENU Button:

9. RECORD & STOP Button:
10. PLAY & PAUSE button:
11. REVERSE & FORWARD Buttons:
12. Mounting Hole:
13. Flush Wall Mount Holes:
14. Battery Compartment:
Note: When changes are made to NTSC/PAL or SToP/overWriTe functions, you must shut off and
restart the unit to save your changes.
STEALTH1
All manuals and user guides at all-guides.com
TOP
2
3
The PINHOLE CAMERA is located in this small hole
Always stop recording by pressssing the STOP button first BEFORE putting
the POWER button in the OFF position
Supports SD and SD-HC memory card
To view footage, use the RCA video output to connect to your television
Connection to a TV is NOT required when recording
NTSC is the video system used in North America. PAL is used in Europe and
parts of Asia
Select whether to overwrite the recorded SD card or stop recording
completely when the card is full. When you select "Overwrite", the oldest
stored video will be recorded over first.
Connect POWER CORD here
Opens and exits the menu
Starts and stops recording; stops playback of recorded footage
Play and pause playback of recorded footage
Allows you to navigate through the menu options, and reverses and
forwards through footage
Attach the mounting bracket here
Allows you to mount the camera directly onto the wall
Camera can be battery powered so the system is completely wireless
BACK
5
6
7
4
8
9
10
11
12
13
14
3