Important Information For Initial Operation; Operation Instructions - erba 03079 Mode D'emploi

GB - INSTRUCTION MANUAL

7. IMPORTANT INFORMATION FOR INITIAL OPERATION

-

8. OPERATION INSTRUCTIONS

It is possible that some air is trapped in the hydraulic system resulting in reduced lifting performance.
Open the oil screw (9) 2-3 turns hold the lowered support arm in place and execute a few pumping
motions with the pump lever.
To lift loads close the valve again (only „hand-tight"). You can now lift weights up to the max. load
capacity indicated in the technical details.
To lower the load slightly open the valve. The more you open the valve, the faster the load is
lowered. Loads must be lowered slowly and smoothly at all times.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 15
Changes, print, punctuation and other errors reserved!
Instruction manual
03079
Issue: 03/2020